UltraLife Smoke detection WiFi camera

Description

UltraLife Smoke Wi-Fi camera with long stand-by time

This is a Wi-Fi extension of our already popular Stealthtronic UltraLife series, which focuses on highest possible standby time on a single battery charge. You will have the ability to view the picture online on your smartphone.

This device is designed to be used in offices or indoor spaces, as it does not have IP68 waterproof protection. Nonetheless, it will work in outdoor environment as long as there is a protection from water exposure. It has got a virtually invisible pinhole camera and a PIR motion sensor.

Stronic UltraLife hidden camera in PIR is easy to install and mount onto a wall, the whole set-up will take less than 5 minutes of your time and you can start viewing the recordings. The sensor will activate on a distance up to 7 meters.

Where can we use UltraLife Smoke Wi-Fi camera ?

• hidden monitoringof your commercial space
• thief identificationif you are losing stock, even though you have cameras installed, there are always blind spots

Function of UltraLife Smoke Wi-Fi PIR

• Extremely long-lasting battery– this moduleis equipped with a PIR sensor which has a consumption of only 1-2mAh, that is used in combination with a battery of 5500mAh Li-Pol
• Live Wi-Fi view
  Integrated Wi-Fi module in the device itself, will give you the possibility to see the online recordings at all times, be cautioned, as the device consumes energy while recordings are being watched.
• Fast activation time
  The motion detection with PIR in this module is extremely fast, as the detection will occur in matters of seconds.
• Mobile phone controls
  The application has a support of 4 cameras at the same time, meaning you can control up to 4 of them in the application. You can view videos as well as pictures.
• HD Quality
  The chip is CMOS with 1.3Mpix , the view angle is 70 degrees and it records audio as well as video.
• Memory
  The memory capacity is 32GB which will last for about 80 hours of usage. There is a function for automatic footage overwriting, which means that you will not have to worry about taking out the card. You can also swap the SD cards at your convenience, please make sure that the device is powered off.

Additional information

Before the 1st time usage, please make sure that the device has got at least 6 hours of charge. Before dispatching it from our company, we always charge the battery, but we still recommend giving it a first time full charge.

Camera activation

The activation will happen within 1-2 seconds afterthe movement sensor has been activated. You can turn on push notification on your phone and you will immediately get an alert for movement. Once the movement is no longer present, the camera will put itself in a standby PIR silent mode again. You can connect at any instant to the camera and see the surroundings at your convenience, thanks to the low power consumption of the Wi-Fi module.

Package contents:

• UltraLife Smoke sensor PIR camera
• 3M tape for easy placement
• DC 5V adaptor